Needle Passion Embroidery Limited

Web site:  http://www.NeedlePassionEmbroidery.com

Email address:  connors@needlepassionembroidery.com


* * * Date * * *


Design file names:
AppX14

Design description:
Appliqu & Fringe snowman's head

Price:
US$ 5.95

Keywords:
appliqu fringe xmas christmas snowman head santa carrot prune santa's hat snow cold winter

Special Design Memo:
Appliqu - instructions below.
Fringe tassle - instructions below.

Native design format:
ART (version 3, Bernina)

Size (W X H):
94 x 88mm

Stitches:
6320

Madeira Colors:
1: [m0000] Appliqu placement line (same as #3)
2: [m0000] Appliqu tacking line (same as #3)
3: [m1002] Show White: Satin stitched face outline and tassle which can be a fringe!
4: [m1234] Cherry Red:  Hat
5: [m1035] Prune: Eyes, mouth
6: [m1278] Orange: Nose
7: [m1039] Rust red: nose outline

* * * 

Appliqu instructions:

* Hoop the background fabric and stabilizer.

* Stitch color #1 = outline stitch on the background fabric 

* Remove the hoop from the machine without removing the fabric from the hoop.

* Place the appliqu fabric on top of the outline on the hooped background fabric so that the outline is covered.  You can use some spray adhesive to keep the fabric in place if you wish otherwise hold gently in place with your fingertip.

* Stitch color #2 = same outline to tack the appliqu fabric onto the background fabric.
  Color #2 can be the same as #1 and #3.

* Remove the hoop from the machine and carefully trim the excess of the appliqu fabric as close to the outline stitch as possible.
  Be very careful not to move the hooped background fabric or to cut in it.

* You can also print the design on paper and cut templates of it to be used as patterns if you wish to cut your appliqu fabric in advance. Make sure you cut the fabric a little bit bigger that the pattern is.

* Put your hoop back in the machine and stitch the remaining parts of the design.
Congratulations - It's ready!

* * *

Fringe Design - Stitching and Finishing Instructions:

1. Stitch out the design in normal manner. 
(**note** Because of the large satin stitches this design could stitch slowly on some machines)

2. When ready, remove the hoop from machine. While the fabric is still in the hoop, working on the wrong side of the design, cut the bobbin threads from the wide satin stitch only.  
   Be very careful not to cut the fabric!

3. Flip the hoop the right side up and GENTLY pull up the satin stitches upp. Fluff and you are done.

4. If desired, you can cut the loops on the fringe to add volume and give a more "wild" appearance.

* * *

A legal note about using the embroidery designs:

Items created from any of the Needle Passion Embroidery Limited (below NPE Ltd) designs may be distributed commercially without limitation unless otherwise stated in the individual design notes.  However, it is a violation of copyright law to duplicate, buy, sell, trade, transfer, alter, share with others or send by e-mail copies of the design files or parts of them (the software in embroidery format). 
NPE Ltd cannot be held liable for any consequential damages or monetary losses resulting from the use of any of its embroidery designs.
So, for clarification it is OK to sell an item where the design is stitched on whether it is for a present or you wish to sell the item.  

Hoping you will enjoy the design/s!
With very best wishes, Tiina Connors
